2018

Jeanneau NC 795

2018

Jeanneau NC 795

Swipe Left & Right to view more images
Sold
Portland
List PRice
$
99900
Sale Price
$
0

Listing Type

Location

Price

Brokerage

Sold

Portland

Contact us for location
List PRice
$
99900
Call For Price
Sale Price
$
0

2019 Dealer Demo Days

This is an exclusive opportunity to purchase a display model with a small number of hours on it for a reduced price. Get in touch with us for details.

The NC 795 with its sinuous, dynamic design! Its traditional V-shaped hull, known for stability, delivers a strong performance at sea. Perfectly adapted to family coastal cruising, the NC 795 offers even more innovations and a true feeling of well-being! For purely enjoyable moments with family or friends, opt for this model with its inviting cockpit and U-shaped salon, which transforms into a sundeck. Open to the exterior due to its wide, flush platforms, the cockpit of the NC 795 is truly an invitation to swim!

 This 2018 NC795 is lightly used and was purchased in early 2018. The berth has never been slept in, the head has never been used. The boat comes with lines and fenders, bottom paint applied earlier this year and basically zero wear and tear. This is a fantastic boat in nearly mint condition, at a much discounted price from retail.


360 Virtual Tour

Payment Calculator

$
99900
0
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form

Options & Features

  • GPS
  • Radio
  • Depthsounder
  • Plotter
  • Compass
  • Hot water
  • Manual bilge pump
  • Marine head
  • Electric bilge pump
  • Refrigerator
  • Battery charger
  • Bow thruster
  • Shore power inlet
  • Swimming ladder
  • Cockpit table
  • Cockpit shower
  • Cockpit cushions
  • Electric windlass
  • Bimini Top

Accomodations

Heads
1
Sleeps
3
Staterooms
1

Measurements

Hull Material
Fiberglass
Length Overall (LOA)
24'4"
Beam (Width)
8'4"
Draft (Depth)
1' 7"
Displacement (Weight)
4740

Engine(s) & Performance

# of Engines
1
Engine Make
Yamaha
Engine Model
200hp Four Stroke
Horse Power
200 hp
Hours
Cruise Speed
27 kn
Max Speed
34 kn
Range
Fuel Type
Gas/Petrol

Tanks

Fuel Capacity
74 gal.
Water Capacity
26 gal.
Holding Tank Capacity
13 gal.
BROK ANDREW

Yachting Magazine
Prestige 750

“When the Prestige 750 debuted recently, there was good reason for the fanfare. This vessel — the flagship in Prestige’s 12-model line of flybridges, coupes and yachts starting at 42 feet length overall — is truly something different in her class. And the genesis of that difference can be found on the accommodations levels. That’s right: levels, plural, on a 75-foot motoryacht.”- Kevin Koenig / Yachting Magazine
Read Full Article

Over the last 30 years Jeanneau has mastered the art of the fiberglass injection moulding procedure, using enclosed molds. The advantages of a lighter overall weight, smooth finish, superior quality, and environmentally responsible manufacturing all have been key motivators for Jeanneau to continue to use this method.

Along with injection molding, Jeanneau uses infusion technology for the hulls of their larger models. In this process, fiberglass material is vacuum-sealed and then injected with resin. The amount of resin used is the most advantagious for overall strength and weight, and cut’s down on the release of solvents.

Starting in the 2018 model year, Jeanneau began building of it's 28' NC 895 in Cadillac, Michigan. We are proud to stock a product from Jeanneau built right here in the USA.

Over the last 30 years Jeanneau has mastered the art of the fiberglass injection moulding procedure, using enclosed molds. The advantages of a lighter overall weight, smooth finish, superior quality, and environmentally responsible manufacturing all have been key motivators for Jeanneau to continue to use this method.

Along with injection molding, Jeanneau uses infusion technology for the hulls of their larger models. In this process, fiberglass material is vacuum-sealed and then injected with resin. The amount of resin used is the most advantagious for overall strength and weight, and cut’s down on the release of solvents.

Starting in the 2018 model year, Jeanneau began building of it's 28' NC 895 in Cadillac, Michigan. We are proud to stock a product from Jeanneau built right here in the USA.

Over the last 30 years Jeanneau has mastered the art of the fiberglass injection moulding procedure, using enclosed molds. The advantages of a lighter overall weight, smooth finish, superior quality, and environmentally responsible manufacturing all have been key motivators for Jeanneau to continue to use this method.

Along with injection molding, Jeanneau uses infusion technology for the hulls of their larger models. In this process, fiberglass material is vacuum-sealed and then injected with resin. The amount of resin used is the most advantagious for overall strength and weight, and cut’s down on the release of solvents.

Starting in the 2018 model year, Jeanneau began building of it's 28' NC 895 in Cadillac, Michigan. We are proud to stock a product from Jeanneau built right here in the USA.

Outboard Motors

Yamaha & Suzuki outboard engines offer endless reliability, performance, and ongoing advances and innovations. Yamaha Outboards operates in the United States market for approximately 30 years. Since it's beginnings, their engineers have made a name for themselves in fiercely seeking innovative ways to improve their customer's experience.

Outboard Motors

Yamaha & Suzuki outboard engines offer endless reliability, performance, and ongoing advances and innovations. Yamaha Outboards operates in the United States market for approximately 30 years. Since it's beginnings, their engineers have made a name for themselves in fiercely seeking innovative ways to improve their customer's experience.

Get in touch

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form
Broker Spotlight

Andrew Hepler

Originally from Texas, Andrew studied music in Los Angeles, CA and went on to work for a small record company and television show before deciding to move to the Pacific Northwest in 2013. In 2015 Andrew began working in the boating industry as a boat rigger in Sundance’s Portland shop where he learned the ins-and-outs of the Jeanneau and Cutwater lines. 

In January 2017, Andrew attended the Seattle boat show as a salesman and subsequently became a full time member of the Portland sales team. Now he uses his knowledge gained as a rigger and installer to provide a more comprehensive understanding of the brands that Sundance carries and to help him better assist his customers before, during and after their buying experience. 

Sundance Marina, Oregon
andrew@sundanceyachts.com
713-516-5939

*Sundance Yacht Sales & Marinas offers the details of this boat or yacht in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This boat is offered subject to prior sale, price change, or withdrawal without notice.  Sistership may be pictured. Financing available On Approved Credit (OAC). Rate and term availability may change without notice. Price and payment do not include taxes and licenses.